THERMAL MASTER

Compact, powerful units for small & medium trucks. The cooling unit consists of: -evaporator / evaporator with dimensions of 190mm x 730mm x 58mm tall with a turbine fan 12VDC or 24VDC with high efficiency with a plastic housing, expansion valve, Cipla exchanger, valve defrostu cold-set of Goodyear hose to connect the compressor, evaporator and condenser -complete wiring harness (about 6 m) ​​for connecting the control, security, battery, evaporator, condenser, compressor and hose to the driver cabin cab-driver (the same model in all units Thermal Master) with dimensions of 155mm x 80mm x 45mm height -compressor / compressor production TAMA-TM-15 with electromagnetic clutch two strips of 13mm to 2A, coil powered by 12V or 24V DC -hose water flow (outflow drain) about 4mb -set screws evaporator, condenser (reinforced handle), silicone seals, tightening straps and hoses -control panel with relays and fuses box measuring 150mm x 80mm x 50mm height Cover strip-aluminum to protect electrical cables and coolant hoses -condenser with two axial fans, solenoid valves, three-way valve, filter drier, dryer, pressure tank, pressure switch, plastic housing, dimensions 940mm x 810mm x 190mm height To connect and start the generator is still required: compressor-mounting kit to the vehicle's engine with the belt and the belt tensioner (we have different models on offer) -refrigerant R-404a -professional with the experience and the right tools (from his many years of trouble-free operation depends on aggregate) There is also the option of heating in the winter for a small fee. Very well even at - 20 ° C. See more: http://thermalmaster.co.kr/sub/pd_truck_500.htm ● Specifications Unit: T-500 Compressor: TM08(82cc)/TM15(174cc) or Equivalent Condenser: Aluminum Fins + Copper tubes Evaporator: Aluminum Fins + Copper tubes Voltage: 12V / 24V Defrost: Automatic & manual hot gas defrost Heater capacity: 820W (* Conditions: +5C internal air -20C ambient air temperature). ● Cooling CapacityㆍAmbient 30℃(86F) ※Specifications are subjected to change without notice.

Compact, powerful units for small & medium trucks. The cooling unit consists of: -evaporator / evaporator with dimensions of 190mm x 730mm x 58mm tall with a turbine fan 12VDC or 24VDC with high efficiency with a plastic housing, expansion valve, Cipla exchanger, valve defrostu cold-set of Goodyear hose to connect the compressor, evaporator and condenser -complete wiring harness (about 6 m) ​​for connecting the control, security, battery, evaporator, condenser, compressor and hose to the driver cabin cab-driver (the same model in all units Thermal Master) with dimensions of 155mm x 80mm x 45mm height -compressor / compressor production TAMA-TM-15 with electromagnetic clutch two strips of 13mm to 2A, coil powered by 12V or 24V DC -hose water flow (outflow drain) about 4mb -set screws evaporator, condenser (reinforced handle), silicone seals, tightening straps and hoses -control panel with relays and fuses box measuring 150mm x 80mm x 50mm height Cover strip-aluminum to protect electrical cables and coolant hoses -condenser with two axial fans, solenoid valves, three-way valve, filter drier, dryer, pressure tank, pressure switch, plastic housing, dimensions 940mm x 810mm x 190mm height To connect and start the generator is still required: compressor-mounting kit to the vehicle's engine with the belt and the belt tensioner (we have different models on offer) -refrigerant R-404a -professional with the experience and the right tools (from his many years of trouble-free operation depends on aggregate) There is also the option of heating in the winter for a small fee. Very well even at - 20 ° C. See more: http://thermalmaster.co.kr/sub/pd_truck_500.htm ● Specifications Unit: T-500 Compressor: TM08(82cc)/TM15(174cc) or Equivalent Condenser: Aluminum Fins + Copper tubes Evaporator: Aluminum Fins + Copper tubes Voltage: 12V / 24V Defrost: Automatic & manual hot gas defrost Heater capacity: 820W (* Conditions: +5C internal air -20C ambient air temperature). ● Cooling CapacityㆍAmbient 30℃(86F) ※Specifications are subjected to change without notice.

The cooling unit consists of: -evaporator / evaporator with dimensions of 1030mm x 640mm x 170mm tall with two turbine fans 12VDC with high efficiency with a plastic housing, expansion valve, Cipla exchanger, valve defrostu -cold-set of Goodyear hose to connect the compressor, evaporator and condenser -complete wiring harness (about 6 m) ​​for connecting the control, security, battery, evaporator, condenser, compressor and hose to the driver cabin cab-driver (the same model in all units Thermal Master) with dimensions of 155mm x 80mm x 45mm height -compressor / compressor production TAMA-TM-16HS/ Zexel Seltec TM16 with electromagnetic clutch two strips of 13mm to 2A, coil powered by 12V DC -hose water flow (outflow drain) about 4mb -set screws evaporator, condenser (reinforced handle), silicone seals, tightening straps and hoses -control panel with relays and fuses box measuring 150mm x 80mm x 50mm height -cover strip-aluminum to protect electrical cables and coolant hoses (ca.100cm) -condenser with two axial fans, solenoid valves, three-way valve, filter drier, dryer, pressure tank, pressure switch, plastic housing, dimensions 1010mm x 480mm x 310mm height To connect and start the generator is still required: compressor-mounting kit to the vehicle's engine with the belt and the belt tensioner (we have different models on offer) -refrigerant R-404a -professional with the experience and the right tools (from his many years of trouble-free operation depends on aggregate) There is also the option of heating in the winter for a small fee. Very well even at - 20 ° C. ● Specifications Unit: T-1400 Compressor: TM16(147cc) or Equivalent Condenser: Aluminum Fins + Copper tubes Evaporator: Aluminum Fins + Copper tubes Voltage: 12V Defrost: Automatic & manual hot gas defrost Heater capacity: 1050W (* Conditions: +5C internal air -20C ambient air temperature). ● Cooling CapacityㆍAmbient 30℃(86F) See more: http://thermalmaster.co.kr/sub/pd_truck_1400.htm ※Specifications are subjected to change without notice.

The cooling unit consists of: -evaporator / evaporator with dimensions of 1030mm x 640mm x 170mm tall with two turbine fans 12VDC with high efficiency with a plastic housing, expansion valve, Cipla exchanger, valve defrostu -cold-set of Goodyear hose to connect the compressor, evaporator and condenser -complete wiring harness (about 6 m) ​​for connecting the control, security, battery, evaporator, condenser, compressor and hose to the driver cabin cab-driver (the same model in all units Thermal Master) with dimensions of 155mm x 80mm x 45mm height -compressor / compressor production TAMA-TM-16HS/ Zexel Seltec TM16 with electromagnetic clutch two strips of 13mm to 2A, coil powered by 12V DC -hose water flow (outflow drain) about 4mb -set screws evaporator, condenser (reinforced handle), silicone seals, tightening straps and hoses -control panel with relays and fuses box measuring 150mm x 80mm x 50mm height -cover strip-aluminum to protect electrical cables and coolant hoses (ca.100cm) -condenser with two axial fans, solenoid valves, three-way valve, filter drier, dryer, pressure tank, pressure switch, plastic housing, dimensions 1010mm x 480mm x 310mm height To connect and start the generator is still required: compressor-mounting kit to the vehicle's engine with the belt and the belt tensioner (we have different models on offer) -refrigerant R-404a -professional with the experience and the right tools (from his many years of trouble-free operation depends on aggregate) There is also the option of heating in the winter for a small fee. Very well even at - 20 ° C. ● Specifications Unit: T-1400 Compressor: TM16(147cc) or Equivalent Condenser: Aluminum Fins + Copper tubes Evaporator: Aluminum Fins + Copper tubes Voltage: 12V Defrost: Automatic & manual hot gas defrost Heater capacity: 1050W (* Conditions: +5C internal air -20C ambient air temperature). ● Cooling CapacityㆍAmbient 30℃(86F) See more: http://thermalmaster.co.kr/sub/pd_truck_1400.htm ※Specifications are subjected to change without notice.

Big capacity temperature control for trucks needing deep-frozen capability. Car chiller with heating option THERMAL - 2500.The cooling unit consists of: -evaporator / evaporator with dimensions of 1240mm x 690mm x 170mm tall with two turbine fans 24VDC with high efficiency with a plastic housing, expansion valve, Cipla exchanger, valve defrostu -cold-set of Goodyear hose to connect the compressor, evaporator and condenser -complete wiring harness (about 6 m) ​​for connecting the control, security, battery, evaporator, condenser, compressor and hose to the driver cabin cab-driver (the same model in all units Thermal Master) with dimensions of 155mm x 80mm x 45mm height -compressor / compressor production TAMA-TM-16H9/ Zexel Seltec TM16 with electromagnetic clutch two strips of 13mm to 2A, coil powered by 24V DC -hose water flow (outflow drain) about 4mb -set screws evaporator, condenser (reinforced handle), silicone seals, tightening straps and hoses -control panel with relays and fuses box measuring 150mm x 80mm x 50mm height -cover strip-aluminum to protect electrical cables and coolant hoses (ca.132cm) -condenser with two axial fans, solenoid valves, three-way valve, filter drier, dryer, pressure tank, pressure switch, plastic housing, dimensions 1010mm x 460mm x 410mm height To connect and start the generator is still required: compressor-mounting kit to the vehicle's engine with the belt and the belt tensioner (we have different models on offer) -refrigerant R-404a -professional with the experience and the right tools (from his many years of trouble-free operation depends on aggregate) There is also the option of heating in the winter for a small fee. Very well even at - 20 ° C. See more: http://thermalmaster.co.kr/sub/pd_truck_2500.htm ●Specifications Unit: T- 2500 Compressor: TM16(163cc) or Equivalent Condenser: Aluminum Fins + Copper tubes Evaporator: Aluminum Fins + Copper tubes Voltage: 12V / 24V Defrost: Automatic & manual hot gas defrost Heater capacity: 1280W (* Conditions: +5C internal air -20C ambient air temperature). ● Cooling Capacity: -- ㆍSystem net cooling capacity under ATP conditions including 30℃(=86F)ambient ※Specifications are subjected to change without notice.

The cooling unit consists of: -evaporator / evaporator with dimensions of 1030mm x 640mm x 170mm tall with two turbine fans 12VDC with high efficiency with a plastic housing, expansion valve, Cipla exchanger, valve defrostu -cold-set of Goodyear hose to connect the compressor, evaporator and condenser -complete wiring harness (about 6 m) ​​for connecting the control, security, battery, evaporator, condenser, compressor and hose to the driver cabin cab-driver (the same model in all units Thermal Master) with dimensions of 155mm x 80mm x 45mm height -compressor / compressor production TAMA-TM-16HS/ Zexel Seltec TM16 with electromagnetic clutch two strips of 13mm to 2A, coil powered by 12V DC -hose water flow (outflow drain) about 4mb -set screws evaporator, condenser (reinforced handle), silicone seals, tightening straps and hoses -control panel with relays and fuses box measuring 150mm x 80mm x 50mm height -cover strip-aluminum to protect electrical cables and coolant hoses (ca.100cm) -condenser with two axial fans, solenoid valves, three-way valve, filter drier, dryer, pressure tank, pressure switch, plastic housing, dimensions 1010mm x 480mm x 310mm height To connect and start the generator is still required: compressor-mounting kit to the vehicle's engine with the belt and the belt tensioner (we have different models on offer) -refrigerant R-404a -professional with the experience and the right tools (from his many years of trouble-free operation depends on aggregate) There is also the option of heating in the winter for a small fee. Very well even at - 20 ° C. ● Specifications Unit: T-1400 Compressor: TM16(147cc) or Equivalent Condenser: Aluminum Fins + Copper tubes Evaporator: Aluminum Fins + Copper tubes Voltage: 12V Defrost: Automatic & manual hot gas defrost Heater capacity: 1050W (* Conditions: +5C internal air -20C ambient air temperature). ● Cooling CapacityㆍAmbient 30℃(86F) See more: http://thermalmaster.co.kr/sub/pd_truck_1400.htm ※Specifications are subjected to change without notice. chiller much more powerful than the well-known manufacturers in the market already Thermo King C-100, C100, C-200, C200, V-200, V200, Carrier Transicold Viento 200, Neos100, Xarios200, Zanotti Z-20, Hwa Sung HT050, HT050RT, HT-050. Comparable power to the cooling and heating units on the market known Thermo King V-300, V300, Carrier Transicold Viento 300, Xarios300, Zanotti Z-30, Z-35, Hwa Sung HT100, HT100RT, HT-100

Refrigeration-heating Unit THERMAL 1400, THERMAL1400, THERMAL-1400 The cooling unit consists of: -evaporator / evaporator with dimensions of 1030mm x 640mm x 170mm tall with two turbine fans 12VDC with high efficiency with a plastic housing, expansion valve, Cipla exchanger, valve defrostu -cold-set of Goodyear hose to connect the compressor, evaporator and condenser -complete wiring harness (about 6 m) ​​for connecting the control, security, battery, evaporator, condenser, compressor and hose to the driver cabin cab-driver (the same model in all units Thermal Master) with dimensions of 155mm x 80mm x 45mm height -compressor / compressor production TAMA-TM-16HS/ Zexel Seltec TM16 with electromagnetic clutch two strips of 13mm to 2A, coil powered by 12V DC -hose water flow (outflow drain) about 4mb -set screws evaporator, condenser (reinforced handle), silicone seals, tightening straps and hoses -control panel with relays and fuses box measuring 150mm x 80mm x 50mm height -cover strip-aluminum to protect electrical cables and coolant hoses (ca.100cm) -condenser with two axial fans, solenoid valves, three-way valve, filter drier, dryer, pressure tank, pressure switch, plastic housing, dimensions 1010mm x 480mm x 310mm height To connect and start the generator is still required: compressor-mounting kit to the vehicle's engine with the belt and the belt tensioner (we have different models on offer) -refrigerant R-404a -professional with the experience and the right tools (from his many years of trouble-free operation depends on aggregate) There is also the option of heating in the winter for a small fee. Very well even at - 20 ° C. ● Specifications Unit: T-1400 Compressor: TM16(147cc) or Equivalent Condenser: Aluminum Fins + Copper tubes Evaporator: Aluminum Fins + Copper tubes Voltage: 12V Defrost: Automatic & manual hot gas defrost Heater capacity: 1050W (* Conditions: +5C internal air -20C ambient air temperature). ● Cooling CapacityㆍAmbient 30℃(86F) See more: http://thermalmaster.co.kr/sub/pd_truck_1400.htm ※Specifications are subjected to change without notice. chiller much more powerful than the well-known manufacturers in the market already Thermo King C-100, C100, C-200, C200, V-200, V200, Carrier Transicold Viento 200, Neos100, Xarios200, Zanotti Z-20, Hwa Sung HT050, HT050RT, HT-050. Comparable power to the cooling and heating units on the market known Thermo King V-300, V300, Carrier Transicold Viento 300, Xarios300, Zanotti Z-30, Z-35, Hwa Sung HT100, HT100RT, HT-100